Structure of metal shredder

1. Special moving and fixed blades for metal shredders
The shredder blade is divided into a fixed knife and a moving knife. The fixed knife is fixed on the main shaft of the shredder through an internal hexagonal clamping hole to crush the material.
2. Metal shredder spindle
The regular hexagonal interface shaft is connected to the reducer through bearings and couplings.
3. Metal shredder chassis
It mainly provides support for the installation of bearings and the fixation of the main shaft, and at the same time provides a relatively closed space for the linkage crushing of four or two axes.
4. Metal shredder bearings
The internal pressure-bearing cylinder reduces friction during spindle rotation, thereby reducing torque loss.
5. Reducer
The motor output speed is adjusted through the reducer, while reducing motor damage caused by spindle impact and increasing spindle torque.
5. Support frame, main body, motor, silo, distribution cabinet, electromagnetic reversing valve, and other controls and other accessories.